Post Construction Cleaning For Your New Home Or Office
Professional cleaners could use their staff of washing authorities and state-of-the-art cleaning gear to clean up the dust, soil and dirt off the conclusion rapidly prior to the furniture and furnishings could be used or installed. The surfaces would have to be washed before painting as the clear presence of dust or muck would not let the most effective paint to keep for long. The floors would have to be washed and refined ahead of the carpets can be laid. The windows would need to be washed ahead of the curtains may be set up. The ceilings would need to be wiped before decorative lightings can be installed.
If you should be searching for Post structure washing, contact any skilled solution who will help you out in handling the task. They are empowered with teams of washing authorities and modern gear that can effectively conduct the cleaning task. Qualified post construction washing authorities totally clear the creating when contractors or renovators leave the premises. They offer cleanup solutions like cleaning up surfaces, removing dirt, discarding dust and remaining components. You can just curl up after employing an expert solution who can do it all for you.
Post Construction Cleaning Process
Just as no two construction jobs are the same, no two cleaning jobs are either. Therefore, most services change their process to best meet your needs. However, there are generally some guidelines that they follow.
This may include a rough clean, which takes place during the construction before the finish work is complete. This can include cleaning plywood 2 or concrete floors prior to the new flooring going down or scrubbing walls and preparing surfaces. Some rough cleans also are done at the end of construction and involve the removal of any trash, debris, or hazardous substances. Not every construction clean needs a rough clean, but many do to some degree.
The interior finish clean is next and, generally, involves cleaning all surfaces in and around the construction zone. This includes vacuuming and dusting all surfaces, such as baseboards, the interiors and tops of cabinets, and furnishings. Bathrooms, countertops, and cabinets are all cleaned from top to bottom. If your service includes windows, these are thoroughly washed as well. Caulk 3 and sealants are usually checked and may be cleaned if spills occurred.
Sometimes an external finish clean is also included. This involves cleaning the exteriors of windows, removing things like nails or debris from around the home, and making sure that all caulk 3 and paint is cleaned up and finished. If you only had interior work done, this phase may not be necessary.
POST-CONSTRUCTION CLEANING CHECKLIST
- Vacuum Carpets & Upholstery
It’s all too easy for dust and dirt particles to embed themselves in curtains, upholstered furniture and carpeted floors. If allowed to settle after construction, the result can not only look filthy, but also cause itchy, irritating reactions for friends, family or guests. Vacuum all soft surfaces, paying close attention to the details. Remove and vacuum each furniture cushion, and the underlying frames. Try vacuuming twice if you feel any residual dust after the first round.
- Wipe Down Hard Surfaces
Clean surfaces from the top down. Start by wiping the dust off your walls – yes, even your walls collect dust during construction. Dry dusting is the safest way to remove the particles without damaging a wall’s surface, but a damp cloth can also be used depending on your type of paint or wall covering. Refer to the paint or wallpaper manufacturer before using any moisture, and test a small area before proceeding. Moldings and cabinets are another favorite resting spot for dust particles. Take a duster to these areas next. Clean the interior shelves of all cabinets, paying special attention to those hard-to-reach corners. Wipe off countertops and any other flat surfaces before tackling the dirt and debris that’s on or near the floor. Then, sweep out any visible dust, and mop your hard floors from wall to wall.
- Clean Air Vents & Replace Filters
In a large home renovation project means, dust and debris will mingle with the air itself, making its way to your vents. Even if you only renovated one part of your home, treating the air vents and filters in that space is critical to reduce the amount of dust that can spread through the rest of your home. Remove the vent covers from the surrounding walls and ceilings, clean each one with soap and warm water, and let them dry thoroughly. Replace any exposed air filters with fresh ones before replacing the vent covers. Breathing dusty air can lead to allergies and respiratory issues, so remember not to skip this step!
- Don’t Forget About the Little Things
Clean any other furniture or items in the renovation zone for a fully dust-free living space. Here’s a quick list of commonly overlooked areas:
- Ceiling fan blades
- Light fixtures
- Lamp shades
- Electronics
- Small appliances
- Decorative items
Tips on Post Construction Cleaning
- Dealing with all of the contractor leftovers
What a mess. It looks impossible, doesn’t it? The first step is a serious session of trash patrol. There is lumber, drywall, and garbage everywhere. Take a walk around and notice both the interior and exterior areas. Keep your eyes open for plastic tarps, tape, drop cloths and construction supplies like nails, screws, staples, bolts, etc. The crews aren’t trying to make your life difficult by making a huge mess, but still, be prepared to pick up a lot of trash and debris during this first step of post construction cleaning.
- Hard floors – making them presentable again with post construction cleaning
Inspect the floors. You’re going to be appalled, but don’t worry. It can be cleaned. All construction work is messy and the flooring seems to always take the brunt of the mess. Check them for any damage, then start mopping, waxing, polishing and buffing. If you should run across any wood damage, get back with the contractor and ask for it to be repaired.
- Rescuing your carpets from traffic, dirt, and grime
Carpet fibers will trap all of the fine wooden splinters and all of the dust. That’s not to mention the smell. You will need to use an industrial shop vacuum to get the grounded dirt and other objects out. After a good vacuum, shampooing will be in order. Steam cleaning might even be necessary. Be sure and allow for all the treated carpets to thoroughly dry before they are reopened to any foot traffic.
- Walls and baseboards
The walls and baseboards are going to get hit and scratched during construction. There’s no way to avoid it. Crews use heavy tools and equipment that can cause minor dents, dings, and bruises. Check for this kind of unavoidable damage. It will need to be patched and repainted. Once you have addressed these concerns, clean the walls completely and give the baseboards a cleaning with a dishwasher detergent and water mixture. Use a Magic Eraser pencil for wooden surface scars.
- Windows and mirrors
Neither you or your customers want to look at dirty windows. Dingy windows and mirrors look awful and it’s terrible for business. To restore window glass and mirror shine, use a heavy-duty glass cleaning product. Begin at the top and work down, and then be ready to rinse. You will probably have to repeat this process several times. For a great finish, let your last step be with dry cloth and polish.
- Lighting – getting the shine back
You will start to wonder how the powdery dust got on everything. The lights and bulbs will be filthy. The dust film will actually reduce efficiency and produce an unpleasant smell. Be sure to turn off the electricity before cleaning light bulbs with a dry, soft cloth.
- Cabinets, drawers, and closets
It’s so easy to overlook closets and drawers because they are closed most of the time. But you better believe the construction mess is in there too. And whatever you have stored is going to be dirty now, as well. Inspect all of your closets, cabinets, and drawers – and use a flashlight. Be prepared to clean the floors, walls and synthetic materials.
- HVAC and interior systems
The HVAC system in your home is designed to pick up dust and dirt that is airborne. Construction activity certainly has caused a lot of that, and your HVAC is working overtime to keep up. Change the filters now. If your ductwork needs cleaned, hire it done professionally, as it is a big job. By hiring it done, you will get the entire HVAC tuned up and all registers and vents will be free of any impediments.
- Sidewalks and driveways
What’s the old saying about “first impressions?” Your driveway, sidewalks, and entries are your guest’s first impression – whether it be your friends and family or customers and business associates. Make certain that your sidewalks are swept and you have gotten rid of any leftover building materials. Power wash the driveway and all exterior walkways. Dirt, sand, and gravel have accumulated throughout the project, and removing it will make a big difference.
- Details and the final post construction cleaning touches
You’re getting close now. It’s finally time to put the final touches on this cleanup project. Polish the doorknobs, dust the window frames, outlets and switches, and vacuum all debris from sliding door tracks. Have a variety of sponges handy for this final stage. Let the fine tuning begin.
Why Your Should Hire Post Construction Cleaning After Your Home Project
- They give your house or room a great first impression.
- They make your home look clean.
- They make your home inviting.
- They give you a great piece of mind.
- They make your home convenient to live in.